Hollister New Image Two-Piece Standard Wear Flat Cut-to-Fit Ultra-clear Drainable Pouch Kit

Hollister New Image Two-Piece Drainable Pouch Features

• Hollister New Image Two-Piece Standard Wear Flat Cut-to-fit Ultra-clear Drainable Pouch Kit ncludes
  - Pouch
  - Skin barrier
  - Stoma measuring card
  - Instructions for use
• Designed to be opened at the bottom when emptying
• Skin barrier provides excellent adhesion to the skin and is designed to be worn for more than one day
• Lock n Roll microseal closure utilizes plastic interlocking fasteners to create a secure closure at the bottom of the pouch
• Soft, beige one-sided ComfortWear pouch panels on body side help provide comfort
• Belt Tabs
• Comes with tape border
• Ultra-clear odor-barrier pouch film
• Non-sterile
• Latex free
• Length : 12"

How to clean Hollister New Image Two-Piece Cut-to-Fit Drainable Pouch?

1. Carefully lift an edge of the adhesive and peel downward, gently pushing the skin away from the skin barrier Properly dispose of used pouch and skin barrier Do not flush down toilet.
2. Clean the skin with water or with gentle soap as recommended by your healthcare professional. Rinse and dry thoroughly. Do not use oils, powder,lotion, or lotion-type soaps on the skin.
3. Measure the stoma using a stoma measuring guide before every barrier application (B using a pre-sized barrier opening, go to step 6).
4. Trace the determined barrier size opening onto the skin harden The skin barrier should fit where the skin and stoma meet. Verify that no skin is showing between the skin barrier and the stoma to help prevent leakage and skin irritator.
5. Using small curved scissors, carefully cut an opening in the skin barrier to match the pattern Do not cut beyond the line on the release liner.
6. Remove the release liner from the skin barrier.
7. Center the skin barrier opening over the stoma in a diamond shape. For tape bordered barriers, remove the backing paper on both sides and press adhesive against the skin.
8. Apply gentle pressure to the skin barrier for about a minute for best adhesion.
9. Attach the pouch to the skin barrier by engaging the lower edges of the pouch flange and the skin barrier flange. Press the two flanges together. A series of "clicks" will confirm you are doing it correctly. No more "clicks" means the pouch is secured.
10. Close bottom of pouch. If using a drainable pouch, close the Lock 'n Roll microseal closure at the bottom of the pouch or apply a pouch damp. Refer to the Lock 'n Roll Microseal Closure Care Tip for more information on how to use this closure system.
11. If using a urostomy pouch, make sure the drain valve is closed. The teardrop on the drain valve should face the body side of the pouch. If desired, apply the cap provided in the box.